Master Mason Blue Lodge Apron Case – Black Leather Square Compass Emblem

Description

Master Mason Blue Lodge Apron Case – Black Leather Square Compass Emblem

Master Mason Blue Lodge Apron Case is built around two specific internal dimensions: 20 by 15 inches and 18.5 by 16.5 by 2 inches, measurements that accommodate apron bodies ranging from 14 by 16 inches up to 16 by 18 inches without folding the apron face or compressing the border fringe during transit. That dimensional precision is the foundation of everything else the case does. A transport case that forces an apron to fold at the wrong point risks creasing bullion thread embroidery or compressing velvet pile in ways that do not recover before the next Lodge session.

Black leather forms the exterior shell across the full case body, with a surface finish that holds its profile under the compression stress of transit without softening or deforming at the corners. The exterior carries a Square and Compass G emblem on the front face, embroidered in black thread on the black leather ground. The tone-on-tone execution of the emblem means it reads as a textural detail at close range rather than a high-contrast graphic, which is appropriate for a carrying case where the emblem functions as an identifier rather than a decorative centrepiece.

A three-side zipper opening runs across the top and down both side edges of the case, allowing the front face to open fully flat for apron placement and retrieval without requiring the case to be inverted or tilted. Full three-side opening access is the key functional advantage over top-only zipper cases: the apron slides in and out horizontally without corner contact against the zipper track. A quality metal lock provides secondary closure security at the front face, holding the case sealed during transit independent of the zipper.

The interior holds up to three aprons along with additional accessories through a system of internal straps and a pocket. The strap system holds the apron stack in position during transit, preventing the contents from shifting against the interior walls when the case is carried or placed down. The interior pocket accommodates gloves, collars, or small accessories alongside the aprons without loose items moving freely inside the case.

A solid hand strap is mounted at the top of the case for carrying, constructed to handle the combined weight of three aprons and accessories without handle flex or pull at the mounting points. Gold tone metal hardware is visible at the top clasp and corner reinforcement points, providing structural support at the case edges where transit stress concentrates.

Compatible aprons include Craft Master Mason, Worshipful Master, Provincial Undress and Full Dress, Royal Arch Companion, Principal and Provincial, Royal Ark Mariner Member, WCN/PCN, Grand Officer, Mark MM, Mark Worshipful Master, and Mark Provincial grades across both size options.

The three-side zipper track maintains smooth operation along its full length without catching at the corner transitions between the top and side runs.

Product Features

Three-Side Zipper Full-Open Access

The zipper runs across the top and down both sides, allowing the front face to open completely flat for horizontal apron placement without corner contact against the zipper track.

Black Leather Exterior with Tone-on-Tone Square Compass Emblem

High-quality black leather shell carries the Square and Compass G emblem in black thread, reading as a textural identifier at close range appropriate for a professional carrying case.

Dual Size Compatibility for 14×16 and 16×18 Aprons

Internal dimensions of 20×15 inches and 18.5×16.5×2 inches accommodate both standard apron sizes without folding the apron body or compressing border fringe during transit.

Quality Metal Lock with Gold Hardware

A metal lock provides secondary closure security at the front face, with gold tone hardware at the lock, handle mounts, and corner reinforcement points throughout the case construction.

Internal Strap System and Accessory Pocket

Straps hold the apron stack in position during transit, while the interior pocket keeps gloves, collars, and small accessories contained without loose movement inside the case.

Capacity for Three Aprons Plus Accessories

The interior accommodates a maximum of three aprons alongside gloves and accessories, covering a full officer set within a single carried case.

Specifications

• Exterior Material: Black leather
• Emblem: Square and Compass G, machine embroidery
• Case Sizes: 20 x 15 inches and 18.5 x 16.5 x 2 inches
• Compatible Apron Sizes: 14 x 16 inches and 16 x 18 inches
• Closure: Three-side zipper and quality metal lock
• Capacity: Maximum three aprons plus accessories
• Hardware: Gold tone metal fittings
• Interior: Strap system and accessory pocket
• Handle: Solid hand strap

FAQ

Q: What apron sizes does this case accommodate?

A: The case is built with two internal dimensions covering apron bodies of 14 by 16 inches and 16 by 18 inches, allowing both standard officer apron sizes to be stored flat without folding the apron face or compressing the border fringe.

Q: How does the three-side zipper opening work on this case?

A: The zipper runs across the top edge and down both side edges, allowing the entire front face to open completely flat. This means aprons slide in and out horizontally without the corners contacting the zipper track during placement or retrieval.

Q: How many aprons can this case hold?

A: The interior accommodates a maximum of three aprons alongside gloves and small accessories, with an internal strap system holding the apron stack in position during transit to prevent shifting against the case walls.

Q: Which Masonic apron grades are compatible with this case?

A: Compatible grades include Craft Master Mason, Worshipful Master, Provincial Undress and Full Dress, Royal Arch Companion, Principal and Provincial, Royal Ark Mariner Member, WCN/PCN, Grand Officer, Mark MM, Mark Worshipful Master, and Mark Provincial aprons across both size options.

Q: What hardware is used on the exterior of this case?

A: Gold tone metal hardware appears at the front lock, handle mounting points, and corner reinforcement areas throughout the case, providing structural support at the transit stress points while maintaining a consistent metallic finish across the exterior.