Masonic Crown Cap Case – Black Imitation Leather Zip Closure

Description

Masonic Crown Cap Case – Black Imitation Leather Zip Closure

Masonic Crown Cap Case is built around a single construction priority: keeping a ceremonial crown cap protected between Lodge meetings without adding bulk or complication to the brother’s kit. The circular body measures 22cm in diameter and 10cm in height, dimensions that correspond directly to standard Masonic crown cap sizing, meaning the cap sits inside without compression or distortion to the brim or body. Imitation leather covers the full exterior surface in black, a material choice that resists surface scuffing during transport better than fabric alternatives and wipes clean after contact with other items in a regalia bag.

The case body is fully stitched throughout, which is the construction detail that separates a case built for regular use from one built for occasional display. Full stitching means the seams joining the base panel, the side wall, and the zipper track are each sewn rather than glued or heat-bonded. Stitched seams flex under pressure and return to shape. Bonded seams separate at stress points over time, particularly at the base-to-wall junction where the weight of the cap concentrates during carrying. The fully stitched construction visible through the consistent seam line running the perimeter of this case confirms that junction is sewn to hold.

A full perimeter zip runs around the complete circumference of the case, opening the top panel entirely for direct access to the cap inside. Full perimeter zip access means the crown cap can be lifted straight out without tilting or squeezing through a partial opening, which matters for caps with structured brims or raised insignia that can catch on a narrow opening edge. The zip pull tabs are finished in silver tone, consistent with the chrome metal hardware on the carry handle, giving the case a unified hardware finish across both functional points.

The carry handle is mounted on the side wall with a chrome metal construction and wrapped grip section, sitting flat against the case when not in use and lifting clear for single-hand carry. Chrome metal handle hardware withstands the repetitive stress of lifting and setting down a case across years of Lodge meeting use without the loosening that plastic handle fittings develop over time. The handle position on the side wall keeps the case balanced during carry, with the zip closure at the top remaining horizontal and the base panel below.

Black imitation leather requires no specialist care between uses. Surface marks wipe away with a damp cloth, and the material does not require conditioning or treatment the way genuine leather does, making this a practical storage solution for brothers who need reliable cap protection without maintenance overhead. The case is currently available in black, blue, and red, allowing the brother to match case color to Lodge or degree preference.

The fully stitched base-to-wall seam holds its line under the full weight of the cap during carrying without separation at the stress point.

Product Features

Fully Stitched Construction Throughout

Every seam joining the base, side wall, and zipper track is sewn rather than bonded, giving the case the structural flexibility to handle repeated loading, carrying, and storage without seam separation at pressure points.

Full Perimeter Zip Opening

The zip runs the complete circumference of the case, opening the top panel entirely so the crown cap lifts straight out without tilting or catching on a narrow opening edge.

Black Imitation Leather Exterior

The smooth black imitation leather surface resists scuffing during transport, wipes clean easily, and requires no conditioning or specialist care between Lodge meetings.

Chrome Metal Carry Handle

A chrome metal handle with wrapped grip mounts on the side wall, keeping the case balanced during single-hand carry and withstanding repetitive lifting stress without loosening at the mount point.

Correct Sizing for Standard Crown Caps

At 22cm diameter and 10cm height, the case accommodates standard Masonic crown cap dimensions without compressing the brim or distorting the cap body during storage.

Available in Multiple Colors

The case is available in black, blue, and red imitation leather, allowing selection to match Lodge colors or personal degree preference.

Specifications

• Height: 10cm
• Diameter: 22cm
• Material: Black Imitation Leather
• Closure: Zip Opening

FAQ

Q: What are the exact dimensions of this crown cap case?

A: The case measures 22cm in diameter and 10cm in height, sized to accommodate standard Masonic crown caps without compression or brim distortion.

Q: Is the case stitched or glued at the seams?

A: The case is fully stitched throughout, including the base-to-wall junction and the zipper track seam, giving it structural durability through repeated use that bonded construction cannot match.

Q: How does the zip opening work on this case?

A: The zip runs the full perimeter of the case, opening the top panel completely so the crown cap can be lifted straight out without angling or squeezing through a partial opening.

Q: What colors is this case available in?

A: The case is available in black, blue, and red imitation leather.

Q: Does the imitation leather exterior require any special care?

A: No specialist care is needed. Surface marks wipe away with a damp cloth, and the imitation leather does not require conditioning or treatment between uses.