Master Mason Blue Lodge Pedestal Cover – Dark Blue Velvet Gold Fringe

Description

Master Mason Blue Lodge Pedestal Cover – Dark Blue Velvet Gold Fringe

Master Mason Blue Lodge Pedestal Cover dimensions establish its function immediately. At 25.5 inches wide by 47 inches long with fringe excluded, this cover is sized for altar pedestal placement in a Blue Lodge room, and the dark blue velvet surface provides the ceremonial field that the Square and Compasses emblem requires to read with full symbolic clarity during Lodge sessions.

Velvet at this density absorbs light across its surface rather than scattering it, which is the optical quality that makes gold embroidery work read with maximum contrast on a dark textile field. The Square and Compasses with “G” emblem positioned in the lower field and the diamond-shaped upper emblem with crossed rods are both worked in gold bullion thread, and the 6-inch emblem width gives each symbol enough scale to be legible from the standing positions around the altar. Gold bullion thread carries a metallic core that holds its reflective surface over time without the dull fade that affects standard gold-colored thread after repeated exposure to Lodge room conditions.

The 2.5-inch wide golden metallic fringe runs along both short ends of the cover, and the attachment line is finished with golden metallic braid before the fringe strands are cut and set. The braid serves as the structural anchor for the fringe, and its presence along the full width of both ends means the fringe strands hang from a reinforced base rather than directly from the velvet edge. Fringe attached directly to velvet edge without a braid anchor pulls the velvet fibers under the weight of the metallic strands over time, causing the edge to distort and the fringe to hang unevenly. The braid attachment prevents that distortion and keeps every strand in vertical alignment.

Strand density across the full 25.5-inch fringe width determines how the fringe reads visually. Sparse fringe on a wide pedestal cover creates visible gaps between strand groups that interrupt the ceremonial presentation. Dense, even strand placement fills the full width uniformly so the gold fringe reads as a solid decorative band rather than a series of separated tassels. Each strand on this cover sits at consistent spacing from edge to edge on both ends.

The velvet body carries enough weight for the cover to lay flat on a pedestal surface without curling at the corners or lifting at the center. Lightweight velvet on a surface this size tends to shift during Lodge preparations, but the fabric density here keeps the cover seated through the handling involved in setting up the altar. A smooth reverse lining protects the pedestal surface from direct velvet fiber contact and allows the cover to be repositioned cleanly without catching. The golden metallic braid line along both fringe attachment edges holds its position through the full Lodge session without lifting or separating from the velvet face.

Product Features

Dark blue velvet body at 25.5 x 47 inches

The velvet dimensions cover a standard Blue Lodge altar pedestal with correct proportional overhang on all sides, and the fabric density provides enough weight for the cover to lay flat without corner curl or center lift.

Gold bullion thread Square and Compasses G emblem

The lower emblem is worked in gold bullion thread with a metallic core that holds its reflective surface over time, rendered at 6 inches wide for legibility from standing positions around the altar.

Diamond-shaped upper emblem with crossed rods in gold thread

The upper emblem provides a second symbolic reference point on the dark velvet field, positioned in the upper portion of the cover to balance the layout with the Square and Compasses below.

2.5-inch golden metallic fringe on both short ends

Fringe strands run the full 25.5-inch width on both ends at consistent spacing, providing even coverage without visible gaps that would interrupt the ceremonial presentation of the pedestal cover.

Golden metallic braid along fringe attachment line

The braid runs the full width of both fringe ends and serves as the structural anchor for the fringe strands, preventing the velvet edge from distorting under the weight of the metallic fringe over time.

Smooth reverse lining

The lining on the underside protects the pedestal surface from direct velvet fiber contact and allows the cover to be repositioned cleanly during Lodge room preparation without catching or dragging.

Specifications

• Material: Dark blue velvet with gold bullion embroidery
• Size: 25.5 inches wide x 47 inches long (fringe excluded)
• Fringe: 2.5-inch golden metallic fringe on both short ends
• Emblem width: 6 inches
• Trim: Golden metallic braid

FAQ

Q: What are the exact dimensions of this pedestal cover?

A: The cover measures 25.5 inches wide by 47 inches long with fringe excluded. The 2.5-inch golden metallic fringe adds to the total length on both short ends, making the full hanging length approximately 52 inches when fringe is included.

Q: Why is the fringe attached with a metallic braid rather than directly to the velvet edge?

A: The golden metallic braid along the fringe attachment line serves as a structural anchor for the fringe strands. Direct attachment to the velvet edge without a braid base causes the velvet fibers to distort under the weight of the metallic strands over time, leading to uneven fringe hang.

Q: How large are the embroidered emblems on this cover?

A: Each emblem is 6 inches wide, providing enough scale for both the Square and Compasses with “G” and the upper diamond emblem to be legible from the standing positions around a standard Blue Lodge altar.

Q: Is this cover sized for a standard Blue Lodge altar pedestal?

A: Yes. The 25.5 by 47 inch dimensions are sized for standard Blue Lodge altar pedestal placement, with the fabric weight and density keeping the cover flat without corner curl or shifting during Lodge room preparation.

Q: How should this pedestal cover be maintained between Lodge sessions?

A: Store the cover folded along its length to preserve the velvet fiber direction and prevent the fringe strands from bending at sharp angles. Dry clean only to protect both the velvet surface and the gold bullion thread embroidery.