Past Master Blue Lodge Apron Case – Red Imitation Leather MM WM Provincial

Description

Past Master Blue Lodge Apron Case – Red Imitation Leather MM WM Provincial

Past Master Blue Lodge Apron Case is engineered as a structured carrying solution for Past Master aprons, documents, and Lodge accessories, built in red imitation leather with the slimline profile and flap-over briefcase format that Lodge transport demands. Imitation leather at this construction grade presents a smooth formal surface that resists scuffing and surface marking through regular transport between home, vehicle, and Lodge room, maintaining its red finish without the cracking that lower-grade vinyl develops at fold points and handle stress areas. The briefcase format — square body, flap-over top, center metal latch — gives this case the upright carry position that keeps aprons flat and unwrinkled through transport rather than folded into the curved interior of a round bag.

The flap-over top closes and secures through a quality metal latch mechanism positioned at the center front of the flap, a twist or push-button fitting that holds the case sealed through carry and movement without the zipper failure points that perimeter zip closures develop over time. Fully stitched edges run the complete perimeter of the case body, a construction detail that reinforces the imitation leather at the points of highest stress — corners and edge seams — where unstitched cases split after repeated opening and closing cycles. That stitching is structural rather than decorative, adding dimensional strength to the flat panel construction.

A solid hand strap is mounted at the top center of the case, built for the combined weight of an apron, documents, and personal effects carried through a Lodge car park or up a Lodge staircase. The strap attachment points are reinforced through the case body panel rather than surface-mounted, distributing carry weight across a wider area of the case structure rather than concentrating stress at two small fixing points. A 3-side zipper opening provides access to the interior, allowing the case to open flat for full interior visibility when retrieving or storing the apron without inverting or shaking the contents. An inside pocket and strap hold the apron, gloves, and accessories separately within the interior, preventing items from sliding together during transport.

Two size options serve different apron formats. The MM/WM case accommodates all aprons sized 14 inches by 16 inches with an overall case dimension of 17 inches by 15 inches by one quarter inch — the slimline profile that the input confirms, flat enough to slide alongside a car seat or store upright in a Lodge locker. The Provincial Full Dress case serves both 14 by 16 inch and 16 by 18 inch aprons across two dimension options: 18.5 by 16.5 by 2 inches for fuller dress apron storage, and 20 by 15 by one quarter inch for the flat slimline carry format at larger apron dimensions.

A gold Past Master emblem is positioned at the lower front of the case, identifying the contents and owner’s station without requiring any additional marking or label on the exterior.

The fully stitched edge construction holds its seam integrity through years of regular Lodge transport without splitting at corners or stress points along the case perimeter.

Product Features

Red Imitation Leather Body – Slimline Briefcase Format

Structured red imitation leather construction presents a smooth formal surface that resists scuffing through regular Lodge transport, built in the slimline briefcase profile that keeps aprons flat and unwrinkled during carry.

Quality Metal Latch Closure – Center Front

A metal latch mechanism at the flap center secures the case through carry and movement without the failure points of perimeter zip closures, holding the flap sealed through years of regular Lodge use.

Fully Stitched Edges – Structural Reinforcement

Perimeter stitching runs the complete edge of the case body, reinforcing the imitation leather at corners and seams against the splitting that repeated opening and closing cycles produce in unstitched construction.

3-Side Zipper Opening with Inside Pocket and Strap

Three-side zip access opens the case flat for full interior visibility, while an inside pocket and strap organize aprons, gloves, and accessories separately to prevent movement during transport.

Solid Hand Strap – Reinforced Attachment Points

The top carry strap is mounted through the case body panel rather than surface-fixed, distributing the weight of apron, documents, and effects across a reinforced attachment area during carry.

Gold Past Master Emblem – Front Panel

A gold Past Master symbol at the lower front identifies the case and its owner’s station without additional marking, presenting the degree emblem in the correct position for a Past Master carrying case.

Available in MM/WM and Provincial Full Dress Sizes

MM/WM case: 17″ x 15″ x ¼” for 14″ x 16″ aprons. Provincial Full Dress: 18.5″ x 16.5″ x 2″ or 20″ x 15″ x ¼” for aprons up to 16″ x 18″.

Specifications

• Material: Red Imitation Leather
• Closure: Quality Metal Latch
• Construction: Fully Stitched Edges
• MM/WM Case Size: 17″ x 15″ x ¼” — fits 14″ x 16″ aprons
• Provincial Full Dress Size: 18.5″ x 16.5″ x 2″ or 20″ x 15″ x ¼” — fits up to 16″ x 18″ aprons
• Interior: Inside pocket and strap, 3-side zipper opening

FAQ

Q: What sizes of aprons does this case accommodate?

A: The MM/WM case fits all aprons sized 14″ x 16″. The Provincial Full Dress case fits both 14″ x 16″ and 16″ x 18″ aprons across two available dimensions.

Q: What are the overall dimensions of each case size?

A: The MM/WM case measures 17″ x 15″ x ¼”. The Provincial Full Dress case is available in 18.5″ x 16.5″ x 2″ or 20″ x 15″ x ¼”.

Q: How does the case close and stay secured during transport?

A: A quality metal latch at the center front of the flap holds the case sealed through carry and movement, without the failure points associated with perimeter zipper closures.

Q: Is there organization inside the case for multiple items?

A: Yes. A 3-side zipper opening allows the case to open flat for full access, with an inside pocket and strap holding aprons, gloves, and accessories separately during transport.