Royal Ark Mariner WCN PCN Apron – Silver Multi Colour Rainbow Border

Description

Royal Ark Mariner WCN PCN Apron – Silver Multi Colour Rainbow Border

Royal Ark Mariner WCN PCN Apron carries one of the most visually distinctive border constructions in Allied Masonic Degrees officer regalia: a multi-colour rainbow ribbon border running the full perimeter of the apron body and along the curved flap edge. The rainbow border is not a single ribbon but a layered sequence of colour bands sitting in fixed order from the outer maroon border edge inward through multiple colour zones before meeting the white apron body. That colour sequence is regulated within Royal Ark Mariner degree standards, making consistent colour order across the full border a construction requirement rather than a decorative choice.

The outermost border layer is maroon, running the complete apron perimeter with consistent width at all four edges including the corners. Inside the maroon outer border, the rainbow ribbon layers step inward in sequence: the image shows bands of yellow, green, blue, and additional colour zones running parallel to the apron edge before the white body begins. The 2-inch total ribbon width accommodates these multiple colour bands within a controlled border measurement, keeping the overall apron proportions correct for the 14 by 16 inch body size.

Three silver triangle emblems sit on the white apron body: one on the curved flap and two positioned symmetrically on the lower field. The triangles are rendered in silver tone with clean geometric outlines, sitting flush against the white ground without raised mounting. Silver is the consistent metallic tone across this apron, appearing in the triangle emblems, the belt snake fitting, and as the secondary accent within the border construction. That metallic consistency across all hardware and emblem elements maintains a unified finish across the full apron face.

The curved flap edge carries the rainbow ribbon border along its arc, requiring the multi-colour ribbon layers to follow the curve without bunching at the inner radius or pulling apart at the outer radius. Maintaining consistent ribbon width through a curved seam is a more demanding construction requirement than straight-edge border work, and the ribbon layers here hold their parallel alignment through the full flap arc without visible compression or separation.

The adjustable belt runs through a silver snake fitting consistent with the silver metallic tone carried across the apron face. The belt accommodates standard officer waist sizes and locks at the chosen setting through a full degree ceremony. Soft padding on the reverse reduces apron rigidity against formal dress, and a rear pocket is integrated for officer convenience. Both lambskin and imitation leather are available as body material options, with the multi-colour ribbon border construction consistent across both.

The 14 by 16 inch body dimension positions the apron correctly at the waist for WCN and PCN officer wear without extending below the jacket hem during standing ceremony.

Dry clean only care preserves the multi-colour ribbon dye integrity and prevents the silver emblem finish from oxidizing through contact with water.

Product Features

Multi-Colour Rainbow Ribbon Border in Regulated Colour Sequence

A 2-inch wide multi-colour ribbon border runs the full apron perimeter and curved flap edge in the regulated Royal Ark Mariner colour sequence, with each band maintaining parallel alignment through straight edges and the curved flap arc.

Three Silver Triangle Emblems on White Apron Body

One triangle on the flap and two on the lower field, all rendered in silver tone with clean geometric outlines flush against the white ground, consistent with WCN and PCN degree identification.

Maroon Outer Border Running Full Perimeter

The outermost border layer in maroon frames the complete apron including corners, providing a defined outer boundary for the multi-colour ribbon construction within.

Silver Snake Belt Fitting

The silver hardware finish matches the silver metallic tone of the triangle emblems and border accents, locking the adjustable belt at the chosen waist setting through the full ceremony.

14 x 16 Inch Officer-Grade Apron Body

The specific body dimension positions the apron correctly at the waist for Royal Ark Mariner officer wear without requiring alteration for standard ceremony use.

Soft Padding and Rear Pocket

Reverse padding reduces apron rigidity against formal dress during extended degree work, while the integrated rear pocket provides practical officer storage during proceedings.

Specifications

• Colour: Silver and multi-colour rainbow border
• Material: Lambskin or imitation leather
• Size: 14 x 16 inches
• Border: 2-inch wide multi-colour ribbon
• Belt: Adjustable, silver snake fitting
• Pocket: Rear pocket included
• Padding: Soft padding on reverse
• Care: Dry clean only

FAQ

Q: What makes the border construction on this Royal Ark Mariner apron distinctive?

A: The border uses a 2-inch wide multi-colour rainbow ribbon running in a regulated colour sequence specific to Royal Ark Mariner degree standards, with multiple parallel colour bands stepping inward from the outer maroon border to the white apron body.

Q: How does the rainbow ribbon maintain its alignment along the curved flap edge?

A: The multi-colour ribbon layers follow the curved flap arc without bunching at the inner radius or separating at the outer radius, maintaining consistent parallel band width through the full curve, which is a more demanding construction requirement than straight-edge border work.

Q: What do the three silver triangle emblems on this apron represent?

A: The triangles are the degree identifiers for WCN and PCN rank within the Royal Ark Mariner, positioned with one on the flap and two symmetrically on the lower apron body in silver tone consistent with the Allied Masonic Degrees officer standard.

Q: Which material option is available for this apron body?

A: The apron body is available in lambskin or imitation leather, with the multi-colour ribbon border construction and silver emblem finish consistent across both material choices.

Q: How should this apron be cleaned to preserve the multi-colour ribbon and silver finish?

A: Dry clean only. Water contact risks dye bleeding between the ribbon colour bands and oxidation of the silver emblem finish across the apron face.